Previous Page Next Page

Format Bar Gauge

This dialog appears when you double-click a bar gauge of a chart in a report, or right-click it and select Format Bar Gauge from the shortcut menu. It helps you to format a bar gauge.

The dialog contains the following tabs: Staff Graph, Axis, Pointer, Target, Frame, Range Color and Behaviors (the Behaviors tab is available to charts in library components only).

Sample

Displays a preview sample of your selection.

OK

Applies the changes and closes the dialog.

Cancel

Does not retain any changes and closes the dialog.

Apply

Applies all changes and leaves the dialog open.

Help

Displays the help document about this feature.

Staff Graph

Specifies the properties for bars in the bar gauge.

Bar

Specifies the properties of the bars.

• Layout
  Specifies the layout of the bar gauges. It can be vertical or horizontal.
• Thickness
  Specifies the thickness of the bars, in pixels.
• Start Style
  Specifies the style for the start graph of the bars.
• End Style
  Specifies the style for the end graph of the bars.

Range Border

Specifies properties of the range border.

• Color
  Specifies the color of the borders. To edit the color, click the color image and select a color from the color palette or input the hexadecimal value (for example, 0xff0000) of a color directly in the text box.
• Line Style
  Specifies the line style to apply to the border.
• Transparency
  Specifies the transparency for color of the border.
• Thickness
  Specifies the thickness of the border, in pixels.

Show Range Name

Specifies whether to show the names of the ranges you define.

Axis

The tab consists of four sub tabs: Axis, Tick Mark, Label and Format.

Axis

Specifies properties of the axis in the bar gauge.

Show Axis

Specifies whether to show the axis.

Type

Specifies the position relationship of the axis and the bars.

• Top
  If selected, the bars will be on the top of the axis.
• Bottom
  If selected, the bars will be on the bottom of the axis.
• Center
  If selected, the axis will be in the center of the bars.

Option

Specifies the values to be displayed in the chart. The values are equally divided into three ranges, each of which is filled with the color you specify in the Color Range tab automatically. Applied only when you do not specify ranges for the values in the Color Range tab.

• Minimum
  Specifies the minimum value to be displayed in the chart. You can also use a formula to control the property.
• Maximum
  Specifies the maximum value to be displayed in the chart. You can also use a formula to control the property.

Line

Specifies the properties of the axis lines.

• Color
  Specifies the color of the line.
• Transparency
  Specifies the transparency of the line.
• Style
  Specifies the style of the line.
• Thickness
  Specifies the thickness of the line.
• Use Range Color
  Specifies whether to use the color you define for the ranges as the line color. If checked, the Color and Transparency options will be disabled.

Gap

Specifies the gap between the axis and the bars if the axis is displayed inside or outside of the bars.

Tick Mark

Specifies properties of the tick marks on the axis.

Type

Specifies the type of the tick marks on the axis.

• None
  Specifies not to display the tick marks on the axis. It's meaningless to specify all the other tick mark related properties if this type is selected.
• Top
  Specifies to display the tick marks on the top of the axis.
• Bottom
  Specifies to display the tick marks on the bottom of the axis.
• Center
  Specifies to display the tick marks in the center of the axis.

Major Tick Mark Line

Specifies properties of the major tick mark line.

• Correlate with Axis
  If checked, the line properties of the major tick marks will correlate with that of the axis automatically.
  • Color
    Specifies the color of the major tick mark line. Disabled when Use Range Color in the Axis sub tab is checked.
  • Style
    Specifies the style of the major tick mark line.
  • Transparency
    Specifies the transparency of themajor tick mark line.
  • Thickness
    Specifies the thickness of the major tick mark line.
• Increment
  Specifies the distance between two adjacent major tick marks on the axis.
• Number of Tick Marks 
  Specifies how many major tick marks to be displayed on the axis.
• Tick Mark Length 
  Specifies the length of the major tick mark line.

Minor Tick Mark Line

Specifies the properties of the minor tick mark line.

• Correlate with Axis
  If checked, the line properties of the minor tick marks will correlate with that of the axis automatically.
  • Color
    Specifies the color of the minor tick mark line. Disabled when Use Range Color in the Axis sub tab is checked.
  • Style
    Specifies the style of the minor tick mark line.
  • Transparency
    Specifies the transparency of the minor tick mark line.
  • Thickness
    Specifies the thickness of the minor tick mark line.
• Increment
  Specifies the distance between two adjacent minor tick marks on the axis.
• Number of Tick Marks 
  Specifies how many minor tick marks to be displayed on the axis.
• Tick Mark Length 
  Specifies the length of the minor tick mark line.

Label

Specifies properties of the major tick mark labels.

Type

Specifies the type of the labels.

• None
  If selected, the labels will not be shown.
• Normal
  If selected, the labels will be shown as you specify.
  • Label Every N Major Tick Marks
    Specifies the frequency at which the major tick marks will be labeled.
  • Number of Major Labels
    Specifies how many major tick mark labels to be displayed on the axis.
    • Auto
      If checked, all major tick mark labels will be shown.
    • Fixed
      If checked, you can specify the number of the major tick mark labels to be displayed on the axis.
• Range Value
  If selected, the labels will show the range values you define.

Gap

Specifies the gap properties for the data labels.

• Label Axis Gap 
  Specifies the distance between the data labels and the axis, in pixels.
• Best Effect
  Specifies whether to adjust the data labels automatically to make them placed best. If checked, some labels will be hidden when they are overlapped.

Font

Specifies the font format of text in the data labels.

• Font list
  Lists all the available font faces that can be selected to apply to the text.
• Font Size
  Specifies the font size of the text.
• Font Color 
  Specifies the font color of the text. Not available when Use Range Color in the Axis sub tab is checked.
• Transparency
  Specifies the transparency of the text.
• Rotation
  Specifies the rotation angle of the text around its center, in degrees. The default value is 0.
• Shearing
  Specifies the gradient of the text.

Effects

Specifies the special effects of text in the tick mark labels.

• Style
  Specifies the font style of the text. It can be one of the following: plain, bold, italic, and bold italic.
• Strikethrough
  Specifies the style of the horizontal line with which the text is struck through. It can be one of the following: none, thin line, bold line, and double lines.
• Underline
  Specifies the style of the horizontal line under the text. It can be one of the following: none, single, single lower, bold line, bold lower, double lines, bold double, patterned line, and bold patterned.
• Superscript
  Raises the text above the baseline and changes the text to a smaller font size, if a smaller size is available.
• Embossed
  Makes the text appear to be raised off the page in relief.
• Outlined
  Displays the inner and outer borders of each character.
• Subscript
  Lowers the text below the baseline and changes the text to a smaller font size, if a smaller size is available.
• Engraved
  Makes the text appear to be imprinted or pressed into the page.
• Shadowed
  Adds a shadow beneath and to the right of the text.

Format

Specifies the data format of the major tick mark labels.

Category

Lists the category types. Select one to customize its format.

Format

Displays all the formats of the selected category. Select the required one and click Add to add it as the format of the specified category. You can add only one format for each category.

Properties

Displays the properties of the format you select. If the formats listed in the Format box cannot meet your requirement, define the format in the text field and then click Add to add it as the format of the specified category.

Stack

Lists all the formats you select from different categories.

Add

Adds a format to the Stack list box.

Remove

Removes a format from the Stack list box.

Apply

Applies the specified format in the Stack list box to the major tick mark labels.

Pointer

Specifies the properties of the pointers in the bar gauge.

Use Pointer

Specifies to use pointer to show the pointer.

• Pointer Style
  Specifies the style of the pointer.
  • Value Pointer
    Specifies the style of the value pointer. Select a style from the drop-down list or select Customized and specify another image as the value pointer.
  • Width
    Specifies the width of the pointer.
  • Height
    Specifies the height of the pointer.
  • Position
    Specifies the position of the pointer relative to the bar.
  • Gap
    Specifies the distance between the pointer and the bar, in pixels.
  • Style List
    Opens the Style List dialog for you to specify the pointer style.
• Pointer Color
  Specifies color properties of the pointers.
  • Color
    Specifies the color of the pointers.
  • Color List
    Opens the Color List dialog for you to specify the pointer color.
  • Transparency
    Specifies the transparency for color of the pointers.
  • Use Range Color
    Specifies whether to use the color defined for the ranges as the pointer color. If checked, the three proeprties above will be disabled.
• Pointer Value
  Specifies the pointer value properties.
  • Show Pointer Value
    Specifies whether to show the pointer values.
    • Position
      Specifies the position relationship between the values and the pointers. Select the position from the drop-down list or select customized to customize the position by dragging any pointer value in the design area.

Use Color Bar

Specifies to use color bar to show the pointer.

• Pointer Color
  Specifies the properties of the pointer color.
  • Color
    Specifies the color of the pointers.
  • Transparency
    Specifies the transparency for color of the pointers.
  • Thickness
    Specifies the thickness of the color bar.
  • Color List
    Opens the Color List dialog for you to specify the pointer color.
• Pointer Value
  Specifies the pointer value properties.
  • Show Pointer Value
    Specifies whether to show the pointer values.
    • Position
      Specifies the position relationship between the values and the pointers. Select the position from the drop-down list or select customized to customize the position by dragging any pointer value in the design area.

Target

Specifies the properties of the target in the bar gauge.

Use Target Value

Specifies whether to use target value for the bar gauge.

• Target Value
  Specifies the target value. You can also use a formula to control the value.

Pointer Style

Specifies the pointer style for the target value.

• Target Pointer
  Specifies the style of the target pointer. Select a style from the drop-down list or select Customized and specify another image as the target pointer.
• Width
  Specifies the width of the target pointer.
• Height
  Specifies the height of the target pointer.
• Position
  Specifies the position of the target pointer relative to the bar.
• Gap
  Specifies the distance between the target pointer and the bar.

Pointer Color

Specifies color properties of the target pointer.

• Color
  Specifies the color of the target pointer.
• Transparency
  Specifies the transparency of the target pointer.

Target Value

Specifies the properties of the target value.

• Show Pointer Value
  Specifies whether to show the target value on the bar gauge.
  • Position
    Specifies the position of the target value relative to the bar. Select the position from the drop-down list or select customized to customize the position by dragging the target value in the design area.

Frame

Specifies properties for the frame of the bar gauge chart.

Size

Specifies the size properties of the frame.

• Frame Size
  Specifies the size of the frame.

Fill

Specifies the color and transparency of the frame.

• Fill
  Specifies the color to fill the frame.
• Transparency
  Specifies the transparency to fill the frame.

Border

Specifies the properties for borders of the frame.

• Border Type
  Displays the type of the border.
• Color
  Specifies the color of the border. To edit the color, click the color image and select a color from the color palette or input the hexadecimal value (for example, 0xff0000) of a color directly in the text box.
• Line Style
  Specifies the line style to apply to the border.
• Transparency
  Specifies the transparency for color of the border.
• Thickness
  Specifies the thickness of the border, in pixels.

• End Caps
  Specifies the ending style of the border line.

• butt
  Ends unclosed sub paths and dash segments with no added decoration.
• round
  Ends unclosed sub paths and dash segments with a round decoration that has a radius equal to half of the width of the pen.
• square
  Ends unclosed sub paths and dash segments with a square projection that extends beyond the end of the segment to a distance equal to half of the line width.
• Line Joint
  Specifies the line joint style for the border line.
  • miter
    Joins path segments by extending their outside edges until they meet.
  • round
    Joins path segments by rounding off the corner at a radius of half the line width.
  • bevel
    Joins path segments by connecting the outer corners of their wide outlines with a straight segment.
  • joint round
    Joins path segments by rounding off the corner at the specified radius.

• Path
  Specifies the fill pattern of the border line.

  • Outline Path
    Specifies the fill pattern of the border line to be outline path.
  • Fill Path
    Specifies the fill pattern of the border line to be whole path.
• Dash
  Specifies the dash size of border line.
  • Auto Adjusted Dash
    If selected, the dash size will be adjusted automatically.
  • Fixed Dash Size
    If selected, the dash size will be fixed size.

Gauge Group Name

Specifies properties for the gauge group name.

• Show Gauge Group Name
  Specifies whether to show names for the bars in the bar gauge which are values of the field on its category axis. If the bar gauge contains no category field, the group name shows Report by default.
  • Position
    Specifies the position of the names relative to the bars.

Range Color

Specifies different colors to fill the bars in bar gauge in different ranges.

Adds a new color range.

Removes the selected color range.

Minimum

Specifies the minimum value of the range.

Maximum

Specifies the maximum value of the range.

Color

Specifies the color schema of the range. Click in the color cell to customize the color on the color palette.

Name

Displays the name of the range.

Others

Specifies the properties for values that do not fall into any of the ranges you defined.

• Name
  Specifies the name for the values.
• Color
  Specifies the color for the values. To edit the color, click the color image and select a color from the color palette or input the hexadecimal value (for example, 0xff0000) of a color directly in the text box.

Behaviors

Specifies some web behaviors to the bar gauges.

Adds a new web behavior line.

Removes the selected web behavior.

Moves the selected web behavior up a step.

Moves the selected web behavior down a step.

Events

Specifies the trigger event.

Actions

Specifies the action you want the event to trigger.

• 
  Opens the Web Action List dialog to bind a web action to the event.

Previous Page Next Page